Monday, September 3, 2012

Melbourne Brisbane Computer Repairs, Website design & SEO

Melbourne Brisbane Computer Repairs, Website design & SEO

Link to Computer Help

mapping network drives on a qnap NAS vpn

Posted: 02 Sep 2012 11:30 PM PDT

I have recently installed a few QNAP NAS servers far various business customers.

Since I’m not very familiar with NAS servers in general, and since one customer specifically requested VPN access via the NAS server, I decided to see what was achievable with this type of NAS server.

The number of options available is staggering, and its all Linux-based.

The QNAP servers can do:

  • Microsoft, Linux and Apple networking
  • Webserver file serving
  • itunes server
  • Apple time machine support
  • VPN
  • Joomla, WordPress, phpMyAdmin, vtigerCRM, Magento, etc
  • print server
  • database server
  • backup server
  • uPNP media server support for various protocals
  • Multimedia Station for serving Audio, Video, and Photos
  • Surveillance camera support

In this particular case, I just wanted to enable VPN support, and map a network drive, so that a remote application could access data files on the server

Enabling and configuring VPN is quite easy, as the QNAP website guides you through the process (I decided to use PPTP, as it seemed much simpler to setup).

But once I had established a VPN connection, what next? How do I map a network drive?

I eventually found the solution as follows:

While you are configuring the server via the web admin panel, go to: Application Servers -> VPN Service

make a note of the VPN client pool. it should be something like:

172.19.0.2 – 192.19.0.254

That means the server will appear on the VPN client as: 172.19.0.1

After that, mapping from the windows command line (cmd.exe) is quite easy.

Lets assume that the servers folder share is SDRIVE, the server username is joe (password is pass), and you want to map the folder share to drive W:

You type:

net use w: \\172.19.0.1\SDRIVE pass /user:joe /persistent:yes

after that, you can use the w: as if it was a local (albeit slower) drive.

Although I haven’t been able to test it yet, I have heard that you can lose internet access unless you go to the advanced ipv4 settings of your network settings, and disable the setting: use default gateway on remote network.

Related posts:

  1. cisco vpn client problems. Customer uses software called “simple fund” (by BGL), but they...
  2. Qnap re-launch process smbd and stunnel While setting up a QNAP NAS server, I cam across...
  3. Windows 7 forgets workgroup network share password I put a new Windows 7 PC (W7 pro, 32-bit),...

Posted by funjoke at 12:06 AM

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)